How do you reset the light pressure of your tire? Is that what you're asking? Well, no worries because we've asked that question ourselves and have an answer for you.
At certain intervals, your tire pressure light might come o¬n. You should identify this light and know what it stands for. After seeing the light on your tire pressure monitoring system (TPMS), you have to start taking steps to put it off. As often as this light might come on, you shouldn't ignore it. You need to get it checked out immediately. Examining your TPMS regularly not only helps maintain your tire and vehicle but also keeps you safe.
This article will help you understand why your tire pressure light might be on and what the light means. It also features a step-by-step guide on resetting your light pressure and some FAQS that might help.
Why is Your Tire Pressure Light On?
To be straight, your tire pressure light will be on because the tire pressure of your tires is low. The TPMS might be on immediately when you start your car, or it might come on suddenly during a drive. Your tire pressure might be low because of two major reasons:
When the temperature decreases abruptly, the pressure in the tires tends to decrease as well. You ought to check your tire pressure as often as you can. If you haven't been doing so, sudden weather changes can reduce the pressure in more than one tire. This can cause a significant difference, which might activate the tire pressure light.
A leak or a puncture in your tires
Once there is a hole in your tire, it loses air. The pressure is thereby reduced, and your tire becomes flat. If you have a short distance to cover, you can top it up and keep it moving as slowly as possible. If it is a long way to go, you should try replacing it with a spare tire.
What Does It Mean When the TPMS Light is Flashing?
The TPMS uses a battery. Like all devices that use batteries, the battery is going to get weaker as you continue to use it and will eventually die. A low battery might cause the TPMS light to flash in an irregular manner. This goes without saying that when the TPMS light is flashing, the TPMS battery might need to be replaced.
Another factor that might cause the TPMS light to flash is when there is a problem with one of the sensors. You can confirm this by consulting a professional.
How to Reset Your Tire Pressure Light: A Step-by-step Guide
After stating obvious problems and reasons why the TPMS is on, certainly you wonder what the solution is. Below we have provided you with a step-by-step guide on how to reset your tire pressure light:
Step 1: A 10-minute drive at or above 50 mph
This is very useful as it helps the pressure sensor reset. By the next time your vehicle starts, your tire pressure light will be off.
Step 2: Put the key in the ON position
Instead of starting the car immediately, leave it in the "on" position for a while.
Step 3: Hold the TPMS reset button down and then release it after the pressure light blinks a total of three times
This goes without saying that when holding down the TPMS reset button, you should keep an eye out for the blinks.
Step 4: After starting the car, wait 20 minutes to refresh the sensor
The reset button is right under the steering wheel; you can locate it quickly. In a scenario where you can't find yours, check the driver's manual of your vehicle.
Step 5: Inflate all tires to 3PSI with their recommended pressure and lessen them completely afterwards
Pumping your tires with their recommended pressure and deflate them entirely. Don’t forget to do this with your extra tire because it might have the sensor as well.
Step 6: Pump all tires back to their appropriate pressure
Inflate all tires back to their appropriate pressure helps bring the tires up to their working state.
Step 7: While the vehicle is off, disconnect the positive part of the battery
Step 8: Switch the key to On position. Honk the horn of the car for 3 seconds
Keep honking for 3 seconds to get rid of any power remaining in the battery.
Step 9: Lastly, connect the battery back to the vehicle
Is it Safe to Drive With the TPMS Light On?
When you notice the TPMS light is on, it is natural to be worried. However, you shouldn't panic. Check how the car is working. Is it shaking, jerking, or are there unusual sounds? If there isn't any, you can continue your drive carefully till you get to your destination.
It could have been that the pressure of one of your tires has gone low, and it might be more than one of them. It is not safe to drive at this point, but you can drive slowly until you get to a spot where you can fix it. Or, in case it's just one tire, you can change it for the extra tire.
Taking the state of the tire into consideration is paramount for all car owners. You have to notice all the signals from your TPMS. In case you see the tire pressure light flashing, you should check for changes in your car. And then, you can take the steps above to manage the situation.
This section will go through the frequently asked questions about the pressure light of your tire. Read on to enlighten yourself. That way, seeing your tire pressure light on won't be a scare.
Can I Reset The TPMS By Disconnecting The Battery?
Yes, you can. All you have to do is switch off the car and remove the positive battery cable. Detaching the battery would help reset the TPMS.
Do You Need To Reset TPMS After New Tires?
Yes, you need to constantly reset your TPMS after replacing your tires or even rotating them. You should also reset your TPMS after installing new sensors.
How Often Should TPMS Be Replaced?
The lifespan of a TPMS is within 5-10 years on average. We advise replacing them once their battery is dead/expired or when their components fail. That way, you'll be on the safe side whatever the case may be.
Will The Tire Pressure Light Reset Itself?
Most times, once you have inflated your tires, upon putting on your vehicle, the TPMS may or may not reset itself. This however, is not a guarantee.